If your tool box lid, bed cover, or boat hatch keeps closing when you need it to stay open, it's time to change your strut. Replace it with this universal fit gas strut and make your lid operate like new again. Quick, tool-free installation.
Features:
Specs:
Note: Always replace your struts in pairs, where applicable. Most lids, covers, or hatches have a strut on each side. Failure to replace both struts can result in a warped or damaged hinge.
Gas Strut with Exceptional Stability
Most gas struts consist of a tube filled with pressurized nitrogen gas, a piston, and rod. The Atlas Lift strut, however, has a dynamic damping groove inside the tube that regulates gas movement across the piston. This ensures your tool box lid, bed cover, or boat hatch stays open when you want it open and shuts slowly without bouncing or slamming. Lastly, in contrast to struts that only have gas in the chamber, a few drops of oil have been mixed in to help seal the piston and lubricate the rod. This allows your lid to move more smoothly as the rod travels in and out of the tube.
How to Find the Right Gas Strut for Your Application
Determining which gas strut is right for your application is easy. All you need to do is remove your worn-out strut and locate the force printed on the side of the tube:
Then, pull the rod out so it's fully extended and take the following measurements:
Additional Tips
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Universal Gas Strut Lift Support Arm. This is gonna replace one lift support arm for your truck cover, boat hatch, toolbox, or other application. It will extend out to help keep your lid or hatch open, and it'll give you a little bit of assist as you're extending it out, and then it's going to gently compress while you're closing to help prevent it from slamming shut, potentially causing damage to fingers or equipment that you have in the way, so it is going to be a very important component. So if you are looking to replace one, this is gonna do a good job. It does have the 10 millimeter nylon ball socket connectors, so it will snap right in place onto your 10 millimeter ball studs, give you a nice solid connection.
From the center of one ball socket to the center of the other, our overall length is going to be just over 17 inches, we'll call it 17 3/16 of an inch, our compressed length is going to be right about 10 7/8, just under 11 inches when compressed, so our stroke here is about 6 3/8 of an inch. This does compress with a 64 to 74 pound force, which is equivalent to about 285 to 329 Newtons. It does feature a dampening technology that's going to help provide a nice smooth operation, so you're not gonna have to worry about bouncing or jumping that you sometimes get with other models or styles of lift support arm. This is gonna make sure that even in all weather conditions, whether it's snowing or raining, it's gonna have a nice frictionless movement for you for a nice smooth operation. The steel shaft here is coated with nitride coating, so it's gonna be corrosion resistant for nice long lasting performance.
I won't get in to all the internal components here, but they are gonna do a really good job for you making sure that you're gonna have that nice smooth operation, it's gonna help to make for a nice long-lasting lift support arm here. It does come with a limited lifetime warranty, so if you we're to have any problems with it, you're more than welcome to reach out to us here at etrailer.com. But as long as you're needing that 17 3/16 of an inch extended length, 10 7/8 of an inch compressed length, with that 64 to 74 pounds of force, I think this is gonna be exactly what you need. So that completes our look for today. Again, I'm Michael with etrailer.com, thanks for watching..
fast delivery
Very fast processing and delivery , just what I ordered . Highly recommend !
Great selection. Had what I needed. Quick delivery.
They worked perfect. Glad I made the purchase at etrailer
Install was easy and just want I needed
just took longer then expected .
These worked fine during warm weather, however, when it got cold they quit working and would not hold nor lift the glass lid. These have been replaced with factory units.
The struts fit and delivery was fast. Made in China is always a one to two star deduction.
Perfect fit
I called etrailer and talked to Randall V trying to locate a special door shock for my RV. I needed a special length with added pressure rating. Randall spent the neeed time to find a shock to meet my needs. The shock shipped immediately and was received on time and in new condition. Installed and fits and works perfectly!
This is the second item I have purchased from etrailer for my RV with the same excellent results.
I would recommend etrailer to anyone who is looking for RV parts.
Lee
struts fit perfect and did the job as expected. I will continue to use you in all my orders that you can fill. I have ordered several products from you and have no complaints.
worked well
Fast delivery. Just installed this strut on my motorhome battery bay door and it works great. This particular door is on the large size but only has one strut so I needed a heavy duty strut. This one is doing the job.
I'm using these gas struts to open and hold up the heavy lids on 2 of my truck toolboxes. They're working fine so far. I hope they last for many years.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.